Activated Carbon for PSA

Pressure swing adsorption technology is widely used in the separation, recovery, purification and concentration of industrial gases. This blog post will introduce the application of activated carbon in PSA, the selection of activated carbon, etc.

Pressure swing adsorption technology is widely used in the separation, recovery, purification and concentration of industrial gases. Its principle is based on the fact that the adsorbent can selectively adsorb impurities. Usually, the useful components will not be adsorbed during the adsorption process and can be highly purified for recycling. PSA is mainly applied for petrochemical, fertilizer, metallurgy, coal, food industries and other industries.

Zhulin has proven technical effectiveness and reliability for your gas separation and purification needs.

What is the production process of activated carbon for PSA?

Pressure swing adsorption activated carbon uses low ash anthracite coal as raw material, after crushing it to 200mesh, adding a composite catalyst and coal tar, kneading with appropriate water, and then extruding it into a columnar shape in a molding machine. Then it is undergoing carbonization, acidification, activation and other processes to form special activated carbon. Catalyst will affect the molecular structure of the raw material and improves the micropore distribution of activated carbon.

Parameters of activated carbon for PSA?

activated carbon for PSA

Application of PSA Activated carbon

It is mainly used in PSA hydrogen production plants in the petrochemical industry, industrial gas purification (purification of hydrogen, production of CO, CO2, nitrogen, CH4 and hydrocarbons in mixed gas), etc., and its regeneration effect is very good.


Pressure swing adsorption hydrogen

The adsorbents used in industrial PSA hydrogen production units are all solid particles with large specific surface areas, mainly including activated alumina, silica gel, activated carbon, and molecular sieves. Different adsorbents have different pore size distributions and adsorption capacities.

Zhulin generally provides 1.5mm activated carbon, which is filled in the middle of the adsorption tower and is mainly used to remove CO2 and CO components.

Pressure swing adsorption oxygen production

Oxygen is an important industrial gas. It is widely used in steel, non-ferrous metallurgy, the chemical industry, glass, sewage treatment, waste incineration, and other industries. The pressure swing adsorption oxygen production process (referred to as VPSA- O₂) is a low-cost oxygen enrichment technology. The principle is to use the blower to pressurize the raw material air into the adsorption tower.

Impurity gases such as N₂ are preferentially adsorbed by molecular sieves, and O₂ is enriched at the top of the adsorption tower as product output.

When the molecular sieve adsorption is saturated, the vacuum pump is switched through the valve to evacuate the adsorption tower to restore the adsorption capacity of the molecular sieve bed. In general, two adsorption towers are used in industry to circulate for achieving a continuous output of O₂ production.

About Zhulin Carbon

Relying on advanced technology, Zhulin Carbon has provided our customers with professional oxygen-producing activated carbon, which solves the difficulties and saves the cost of oxygen production.

Zhulin can provide various different types of activated carbon for different PSA applications. For more information about Zhulin Carbon PSA Adsorption Services, call +86-19137612950 or click here to contact us.

İstiyor musun fiyat teklifi al

Merhaba🖐, ürün hakkında daha fazla bilgi almak veya fiyat teklifi almak istiyorsanız lütfen aşağıdaki butona tıklayarak bizimle iletişime geçin👇

Ücretsiz Danışmanlık Alın
Ve Alıntı